|Message: Should I worry about this warning?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am using geant4-10 patch 3. Getting: ------- WWWW ------- G4Exception-START -------- WWWW ------- *** G4Exception : GeomNav1002 issued by : G4Navigator::ComputeStep() Track stuck or not moving. Track stuck, not moving for 10 steps in volume -Detector_two_stack_v203Geom_vol- at point (-2.94654,0.122429,-8.43648) direction: (-0.0160609,0.671728,-0.740624). Potential geometry or navigation problem ! Trying pushing it of 1e-07 mm ...Potential overlap in geometry!
Geometry comes from STEP, translated to STL and then to GDML.
Should I worry? If not, is there a way to turn this off in the .mac file? Thanks, Sveta
|Inline Depth:||Outline Depth:||Add message:|