|Message: Re: GDML Not showing full visualization||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thank you so much for your response. The square keeps coming up for every example gdml file in this example as well as one of my gdml files. I added this line
/vis/geometry/set/visibility World 0 false
to my macro and now all I see is a black screen in the viewer for all of the gdml files in that example. However, when I was working on a previous simulation this line was needed to make things visible. The only warning message I'm getting is this:
-------- WWWW ------- G4Exception-START -------- WWWW ------- *** G4Exception : UI0002 issued by : G4UIExecutive::G4UIExecutive() Specified session type is not build in your system, or no session type is specified. A fallback session type is used. *** This is just a warning message. *** -------- WWWW -------- G4Exception-END --------- WWWW -------
but I don't think that would cause this issue. Also, I added this line to my macro, thinking that it was an angle issue and all I'm getting is a cube.
/vis/viewer/set/viewpointThetaPhi 120 150
Am I not turning off the world box properly for gdml files?
Thank you. -Zach
On Tue, 05 Aug 2014 09:34:19 GMT, Tatiana Nikitina wrote:
> Hello, > > It seems that only World Box has be visualised, but not the solids > inside the World. You can try other gdml files from example G01 and see > if there is the same problem. Do you have warning messages? Normally you > have to see this picture with 'solids.gdml'.See attached file. > > Attachment: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2014/08/05/02.23-82298-creenshoot-G01-solids.png > > Best Regards, Tatiana >
|Inline Depth:||Outline Depth:||Add message:|