|Message: Pixel Size||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi G4 users,
I have encountered a problem with the pixel size.
I divided my detector into pixels using:
/score/mesh/boxSize 0.005 0.012 0.001 mm
/score/mesh/nBin 200 480 1
In this case the pixel size is p=50 nm and I would like to know if there is a pixel size in Geant4 has a limit or we can make it as small as possible.
In the case of p=50 nm the simulation stops at 51000000 events and cannot continue.
When I make the pixel size very small. Let say 2 nm my simulation stops running after a short time. I donít know why! I would like also to know the smallest pixel size which we can reach.
I greatly appreciate your help.
|Inline Depth:||Outline Depth:||Add message:|