Message: G4HalfSpaceSolid cannot be found in Geant4.10.0.0 Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

Question G4HalfSpaceSolid cannot be found in Geant4.10.0.0 

Forum: Geometry
Date: 18 Feb, 2014
From: Yuefeng Qiu <Yuefeng Qiu>

Hello everyone,

I found that G4HalfSpaceSolid has been mention in the Geant4 developer manual, but this kind of solid is no more exist in the Geant4.10.0. Is there any body know the reasons?

The purpose I would like to ask for this G4HalfSpaceSolid is that, we have a CAD-to-CSG conversion tool call McCad. This tool is for decomposing the BREP model in to primary CSG model, which can be use for Monte Carlo codes such as MCNPX. This tool describes primary CSG solid using half-space (e.g half-space planar,..), see the attachment. If Geant4 has this G4HalfSpaceSolid, we are able to write geometry into this kind of solid.

Any information will be appreciated!

Best regards, Yuefeng

   Attachment:
      http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2014/02/18/03.04-1875-Picture1.png

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 Question: Re: G4HalfSpaceSolid cannot be found in Geant4.10.0.0   (Gabriele Cosmo - 18 Feb, 2014)
(_ None: Re: G4HalfSpaceSolid cannot be found in Geant4.10.0.0   (Yuefeng Qiu - 18 Feb, 2014)
(_ More: Re: G4HalfSpaceSolid cannot be found in Geant4.10.0.0   (Gabriele Cosmo - 18 Feb, 2014)
(_ More: Re: G4HalfSpaceSolid cannot be found in Geant4.10.0.0   (Yuefeng Qiu - 18 Feb, 2014)
 Add Message Add Message
to: "G4HalfSpaceSolid cannot be found in Geant4.10.0.0"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]