Message: Re: UnionSolid Strange behaviour Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: UnionSolid Strange behaviour 

Forum: Geometry
Re: Question UnionSolid Strange behaviour (Rafayel Paremuzyan)
Re: None Re: UnionSolid Strange behaviour (Tatiana Nikitina)
Date: 19 Feb, 2014
From: Rafayel Paremuzyan <Rafayel Paremuzyan>

Dear Tatiana,

Thanks for reply,

I did another way, by defining a full sphere, with theta=180 deg. and phi 360 deg (In this case I don't need to rotate it),

Is there any principal difference between half sphere and full-sphere for unionsolid of this shape?


On Tue, 18 Feb 2014 14:14:26 GMT, Tatiana Nikitina wrote:

> Dear Rafayel,
> Thank you for this detailed message.
> The Half of Sphere with Theta=90 degrees is a special case, when conical
> surface is becoming a flat surface. To avoid this you can create the
> same Half of Sphere by using Phi Angle=180 degrees and full Theta of 180
> degrees.
> I propose you to open a problem report in order to investigate this
> case.
> Best Regards, Tatiana.

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 None: Re: UnionSolid Strange behaviour   (John Apostolakis - 19 Feb, 2014)
 Add Message Add Message
to: "Re: UnionSolid Strange behaviour"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews

[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]