|Message: Minimum distance between two surfaces to decide rod length||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear Geant4 Experts
I am trying to build an array of liquid scintillator detectors, for which the support structure is to be build. So I made the structure as shown in the attached file in which there are five circular iron support structure surrounds the central one in a pentagon shape. I would like to interconnect them with a iron rod having inner diameter as 12mm and outer diameter as 20mm. The question is how do I calculate the minimum distance between the two structure to decide the rod length ??? Presently I have all the co-ordinates of the centre of all the rings in the experimental hall.
Presently the five rings has 15degree polar angle with central ring. So, now once the rod length is calculated then how do I calculate the orientation of the rod length with respect to the experimental hall??
Presently experimental hall is the mother volume for all the rings.
I would appreciate if any one can help me for the above issues.
|Inline Depth:||Outline Depth:||Add message:|