|Message: Re: CAD to GEANT (EUGENIE) distribution link||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear Mikhail, Are you interested in importing a CAD geometry into Geant4 or Geant 3 ? For Geant4, there are conversion tools which are described in the Application developers guildes. EUGENIE was for Geant 3.21 - and I do not have any information available. Best regards, John On Jun 20, 2013, at 4:26 PM, Mikhail wrote: > > *** Discussion title: Geometry > > Hi, > > Can one share EUGENIE distribution ( > http://cadd.web.cern.ch/cadd/cad_geant_int/eucgeant.html )? The link > over there doesn't work and I didn't find any other. > > Thanks > > ------------------------------------------------------------- > Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply or unsubscribe) at: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/geometry/1276.html