Message: Re: Typo in G4_STAINLESS-STEEL Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: Typo in G4_STAINLESS-STEEL 

Forum: Geometry
Re: None Typo in G4_STAINLESS-STEEL (Igor)
Re: Question Re: Typo in G4_STAINLESS-STEEL (Vladimir Ivanchenko)
Date: 09 Jan, 2013
From: Igor <Igor>

Hello Vladimir,

>I am not sure if it is typo or we took
>non-standard data for the stainless still

I hope the following quotes from Wikipedia (and references therein) are 

"In metallurgy, stainless steel, also known as inox steel or inox from 
French "inoxydable", is defined as a steel alloy with a minimum of 10.5%[1] 
to 11% chromium content by mass.[2]
Austenite steels make up over 70% of total stainless steel production. They 
contain ...a minimum of 16% chromium ...
...The most widely used austenite steel is the 304, also known as 18/8 for 
its composition of 18% chromium and 8% nickel.[20]

[1] "The Stainless Steel Family". Retrieved 2012-12-08.
[2] "Steel Glossary". American Iron and Steel Institute (AISI). Retrieved 

Best regards,

-----Original Message----- 
From: Vladimir Ivanchenko
Sent: Wednesday, January 09, 2013 2:09 AM
Subject: Re: Typo in G4_STAINLESS-STEEL

*** Discussion title: Geometry


Thanks for the report. I am not sure if it is typo or we took
non-standard data for the stainless still. Would it be possible to make
a reference to handbook or web table which we may use for the memory of
the source of the fix?


Visit this GEANT4 at message (to reply or 
unsubscribe) at: 

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 Ok: Re: Typo in G4_STAINLESS-STEEL   (Vladimir Ivanchenko - 09 Jan, 2013)
2 Ok: Re: Typo in G4_STAINLESS-STEEL   (Vladimir Ivanchenko - 11 Jan, 2013)
 Add Message Add Message
to: "Re: Typo in G4_STAINLESS-STEEL"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews

[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]