|Message: Re: Typo in G4_STAINLESS-STEEL||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello Vladimir, >I am not sure if it is typo or we took >non-standard data for the stainless still I hope the following quotes from Wikipedia (and references therein) are enough: "In metallurgy, stainless steel, also known as inox steel or inox from French "inoxydable", is defined as a steel alloy with a minimum of 10.5% to 11% chromium content by mass. ... Austenite steels make up over 70% of total stainless steel production. They contain ...a minimum of 16% chromium ... ...The most widely used austenite steel is the 304, also known as 18/8 for its composition of 18% chromium and 8% nickel.  "The Stainless Steel Family". Retrieved 2012-12-08.  "Steel Glossary". American Iron and Steel Institute (AISI). Retrieved 2008-10-21." ...  http://www.azom.com/article.aspx?ArticleID=965 Best regards, Igor -----Original Message----- From: Vladimir Ivanchenko Sent: Wednesday, January 09, 2013 2:09 AM To: firstname.lastname@example.org Subject: Re: Typo in G4_STAINLESS-STEEL *** Discussion title: Geometry Hello, Thanks for the report. I am not sure if it is typo or we took non-standard data for the stainless still. Would it be possible to make a reference to handbook or web table which we may use for the memory of the source of the fix? VI ------------------------------------------------------------- Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply or unsubscribe) at: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/geometry/1251/1.html
|Inline Depth:||Outline Depth:||Add message:|