|Message: Re: Help: G4VIntersectionLocator::GetSurfaceNormal Warning||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thanks for the quick reply!
The warning message does not occur for every event. Only events which seem to interact near the surface where the cut is made are given the warning. In these events I am firing gammas with an energy of 1 MeV.
The entire source code for this complex detector is over 5000 lines long, instead of attaching the entire code I have attached the G4SubtractionSolid volume which is causing me the problem. I hope this is sufficient.