|Message: Re: geant4.9.5 CAD/STEP import process||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, Geant4 9.5 does not have the capability of importing geometry in STEP format. Norman
On Thu, 19 Jan 2012 21:30:46 GMT, breddell wrote:
> Can someone easily explain the current capability of this latest version > of G4 with respect to importing in CAD geometry? I looked at the Release > Notes and can not determine (easily) what the current capability is. > > Specifically, if I have a STEP file, can this G4 version import it in > without additional software (i.e. GDML conversion)? If not, what > software is needed? If so, what are the basic steps to do this? > > Any help would be greatly appreciated. > > Thanks. >