|Message: Re: Bug in Text Geometry, version 4.9.4.p02||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Thu, 27 Oct 2011 07:16:27 GMT, Gabriele Cosmo wrote:
> See here: http://bugzilla-geant4.kek.jp/show_bug.cgi?id=1240 > That fix will be included in the next patch. > > Cheers, Gabriele > > --------------------- > On Wed, 26 Oct 2011 22:28:17 GMT, Michael Rinaldi wrote: > > I have the same problem. Any paramter with a unit causes the Geometry > > reader to fail. In my example I have > > > > :P Magnet_len 30*cm > > > > This worked fine in 4.9.3 but fails now. Replacing this with > > > > :P Magnet_len 300 > > > > fixed the problem. > > > > I suspect that the problem is in G4tgrUtils.cc. I did a diff between > > that file and the 4.9.3 version and there were differences in the > > section where "*" is parsed. > > > > Can someone fix this? > > > > Thanks, Mike >