|Message: Implementation of a gas||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have a question concerning the way to implement a gas. I want to build a gas that is a mix of argon, nitrogen and helium.
I've first implemented each element as a gas (kStateGas) and build the mix also as a gas (kStateGas). Then I've implemented each element as a "classic" material and build the mix also as a "classic" material. I've seen no difference in my output results.
The density of the mix is 1.5mg/cm3.
Can someone explain me why there is no difference? What is the best way to implement a gas in Geant4? When one can declare a gas as a simple material, and when this gas must be declared as a gas?
|Inline Depth:||Outline Depth:||Add message:|