|Message: Parameterisation and ReadOut Geometry||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I would like to ask about RO Geometry. At first my detector was a homogeneous box and the Sensitive Detector was created at the same class (ihheretit from G4UserDetectorConstraction). Either the ROGeometry was implemented. In class dealt with ROGeometry the RODetector was constructed with a replica. Now I need to make my detector with box inside from the other matirial. I made the parameterisation and checked that the new part in a right place. But when I try to make the detector and it's part from one material, on the total energy deposite figure I see a "hole" at this place . It means that the energy, relesed in the new part isn't draw in the figure. I cheked the situation then the big detector is a water box and the part is an alimunium box. The sistem knows that this part is from aluminium, as I can see the deposite from secondary electrons behind the "hole", but I still see it at the place where this part situated. I'm afraid I don't understand something in ROGeometry. Could you find what is wrong in my reasoning?
|Inline Depth:||Outline Depth:||Add message:|