|Message: Adding element volume percentage in material definition||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hiii Geant4 Users
I have a scintillator material BC501 in which it has given that hydrogen content is 5.25X10E22 per cubic centimeter and carbon content is 4.08X10E22 per cubic centimeter which menas H is 78% by volume and C is 22% by volume so i define the metarial as
G4Material* Scinti = new G4Material("BC501", density=0.901*g/cm3,nel=2); Scinti->AddElement(C, 78*perCent); Scinti->AddElement(H, 22*perCent);
can any body tell me that my Material definition is correct or not.
thanks in advance
|Inline Depth:||Outline Depth:||Add message:|