|Message: Size limit for geometry||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I tried to create a cylinder with an inner radius below 1nm, which is simply ignored and set to zero in the visualisation using the OGLIX viewer. Using an inner radius of 1nm works however. Creating a cylinder with an outer radius below 1nm is not shown in the visualisation at all.
Is there a size limit of 1nm for geometries (I did not find any in the User Guide) or is it a limit of the OGLIX vis tool?
thank you, Marion
|Inline Depth:||Outline Depth:||Add message:|