|Message: world coordinate||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I define my geometry using coordinate of daughter volume in mother one which has been rotated and translated. The geometry is correct, but now I would like to know the coordinate of my detector (360 boxes) in the world. I read different question related to it, but it seems to me that I need to give a coordinate and use the touchable staff, which seems crazy for me. And also I am able to know the coordinate detector by detector by selecting one detector in OpenIventor with G4PhysicalVolumeModel. But it seems that again I am given one coordinate in the world and the routine search the touchable in the region and give after the coordinate of the volume which is around this point. So my question is: Can I return the coordinate in the world of my volume using the physical or logical identification and/or the copy number ?
|Inline Depth:||Outline Depth:||Add message:|