|Message: Re: Cleaning Geometry Stores||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
> I went through all permutations of order and for some reason it seems > that cleaning the physical stores before the logical ones always gives > me the aforementioned error. If, however, I simply leave the physical > store alone everything seems fine. Based on your reply this seems to be > fine, but I wanted to make sure. > > Is it OK to not clean the physical stores and still clean the logical > and solid stores? The error you get is due to the fact that volumes are being reflected in your geometry. There's no way at the moment to clear the bookkeeping maps of reflected volume pointers if you resets the whole geometry (we will add this!). To do things properly you should avoid deleting volumes which are affected by reflection, and therefore better avoid to directly clear the whole stores! Cheers, Gabriele