|Message: Re: Problem with G4Navigator and Point Relocation when msc limits the step.||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
This relocation is applied on each changed particle and practically at each step. So, in general, it is very well tested in Geant4. If you got such problem, then it may be a problem or your application (for example, you need to understand if your geometry is correctly defined or not) or it is Geant4 problem which happens rarely and you got it by a special chance.
The advice may be to increase verbosity or to use visualisation and reconstruct in details what happens: where particle was in previous steps and what was the step providing such a bug.