|Message: Re: Can I chage the step size durring a single event?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
pete a écrit : > *** Discussion title: Event and Track Management > Email replies to PublicHyperNews@slac.stanford.edu must include: > In-Reply-To: <"/eventtrackmanage/749/1/1/1/1"@geant4-hn.slac.stanford.edu> > Subject: ...change this to be about your reply. > > I would also like to take kinematic information into account when I set > the step size. can you reccomend the most elegent way to get the info to > StepMax? > > thanks > Clearly, as explained by Michel, implementing a G4VProcess would be the best solution for your case. This requires a little bit of work: 1) inheriting from G4VProcess - implement the [AtRest/AlongStep/PostStep]GetPhysicalInteractionLength(...)/DoIt(...) methods. - presumably, you may need only an implementation of the PostStep methods. 2) in your physics list, for particles to which you want to limit the step, include this process into the G4ProcessManager list of processes. Marc
|Inline Depth:||Outline Depth:||Add message:|