Message: /gun/position Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None /gun/position  

Keywords: /gun/position
Forum: Event and Track Management
Date: 15 Oct, 2007
From: Reema <Reema>

Hi all,

I am working to create an application with source position at (-46.5,0,15) cm and the detector at (31.5,0,0). The detector dimensions are 0.15X40X30 cm.

I am using the UI command /gun/position to set the source position. When I place the source at (-46.5,0,0), I get the desired output on the detector. However when I move the source to (-46.5,0,15), there is no output at the detector. When I move the source to (-46.5,0,-15), it works fine. I also tried to hardcode the gun position in the PrimaryGeneratorAction. I see the same effects.

Does anyone have any suggestions as to what might be happening or some mistake that I might be making when setting this geometry? Any help is much appreciated. Thanks in advance! Best regards, Reema

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

 Add Message Add Message
to: "/gun/position "

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews

[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]