|Message: Re: importing forced decays after definit length||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thanks for your help ! So I have set the proper time of the mother according to the decay length given by Pythia. But from another post on the forum (http://geant4-hn.slac.stanford.edu:5090/HyperNews/public/get/eventtrackmanage/15/1.html), I had understood that the daughter particles should be boosted back into the mother particle center of mass frame. Is it not the case ? Cheers, Muriel Makoto Asai a écrit : > *** Discussion title: Event and Track Management > Email replies to PublicHyperNews@slac.stanford.edu must include: > In-Reply-To: <"/eventtrackmanage/559/1"@geant4-hn.slac.stanford.edu> > Subject: ...change this to be about your reply. > > You can specify the decay time in addition to the momentum of the > pre-assigned decay products. Everything should be defined in the > Lab frame. > > -- Muriel Vander Donckt Phone :+41 22 7671539 Fax :+41 22 7678940 CERN 40-4-B24 Mobile:+33 6 23784986
|Inline Depth:||Outline Depth:||Add message:|