|Message: G4UserLimits: random walk||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have a problem with G4UserLimits again. I have a pretty simple geometry (scintillator in a vacuum). The initial particles are low-energy electrons (few-100 eV), which would be then accelerated towards the scintillator, and deflected also, via an E-field). In order to visualize the effect of the E-field, I tried to limit the stepsize via G4UserLimits (otherwise the whole distance to the scintillator is taken in one step, and the curvature of the trajectory is not visible). However, if I set up a max stepsize like this: world_log->SetUserLimits(new G4UserLimits(1*cm)); then my electron begins a random walk in the vacuum.
Thank you, Daniel
|Inline Depth:||Outline Depth:||Add message:|