|Message: Limitation of geometry in GEANT4||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, I hope this is the right place to ask questions because I am using GAMOS, but GAMOS is based on GEANT4 platform
I am running a simulation of optical photon transport in optical fiber where the diameter of the cladding-core practically should be 125/9 um. Theoretically, the optical photon would only travel in the core region. However, the result seems not promising (picture 1). Then I try to increase the diameter of the cladding-core to be 1250/90um and surprisingly I got exactly as I want (picture 2). I would like to ask the solution for this or perhaps this is the limitation of GEANT4
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2018/11/15/07.30-19840-pic1.jpg http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2018/11/15/07.30-41390-pic2.jpg