|Message: Point is relocated in voxels - DICOM||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I've seen other posts in the forum about it, but I didn't find any definite answer:
I run a modified version of the DICOM example (release 10.01), with a parallel world that has two volumes used for scoring when a particles crosses them (phase space concept).
When I run the code I get relatively often the:
-------- WWWW ------- G4Exception-START -------- WWWW ------- *** G4Exception : GeomNav1001 issued by : G4Navigator::ComputeStep() Point is relocated in voxels, while it should be outside! *** This is just a warning message. *** -------- WWWW -------- G4Exception-END --------- WWWW -------
I've seen that it happens mostly for electrons. I attach an example with track verbosity 1 in the file G4Forum1.txt.
The full log of this step is attached in G4Forum2.txt. The error message comes in step 2. It seems that the previous step assigns the location in the voxelized geometry while it should be out. This is seen in line 38, where the z position of the prestep and postep are 1153.50897375416 mm and 1153.575332783188 mm. My voxelized geometry in z extends from 1150.5 mm to 1153.5. So the step starting from 1153.575332783188 mm is assumed to be in the voxels when it actually isn't.
Should I just ignore this messages? When removing the parallel world I get no message. Nevertheless, the volumes at the parallel world are not in the vicinity of this track.
Thanks in advance, George
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2015/05/04/05.15-92575-G4Forum1.txt http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2015/05/04/05.26-49012-G4Forum2.txt
|Inline Depth:||Outline Depth:||Add message:|