|Message: Re: Readout geometry and sensitive detector process hits||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, The problem is solved. I had a small typo in the ReadoutGeometry class, which I located. Balint On 05 Jul 2014, at 21:56, Balint Radics <Balint.Radics@cern.ch> wrote: > > *** Discussion title: Event and Track Management > > Hi, > > I have a sensitive detector the MySensitiveDetector::ProcessHits(...) > function of which never gets called, or the TouchableHistory or G4Track > objects are null when it is called.. > > Which is strange because when I visualize the detector and tracks I can > see that many track goes through my sensitive volume. It is registered > in SDManager in my detector constructor. Also with /tracking/verbose 1 I > can see that the track actually step through the volume. I even set a > step limiter and it works too. > > Can it be that there is some problem with volume overlaps? > > I also have a corresponding Readout geometry class. It seems that > whenever I register the dummy sensitive volume in the Reaadout geometry > class to SDManager the original sensitive detector's > MySensitiveDetector::ProcessHits(...) is not even called at all. While > if I do not register the Readout geometry then > MySensitiveDetector::ProcessHits(...) gets called but TouchableHistory > or G4Track objects are null. > > Also, Geant4 still runs, but there is no error in the output that would > suggest that something is wrong with my sensitive detector or readout > geometry. > > How can I debug this problem? > > Thanks, Balint > > ------------------------------------------------------------- > Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply or unsubscribe) at: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/eventtrackmanage/1212.html