|Message: Could Geant4 simulate the number of secondary electron in the TPC gas||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, I want to simulate primary ionization distance and the number of secondary electron produced by primary ionization per unit length when a charged particle passes through TPC gas. For TPC gas mixture 70% Ar+30%Isobutant, at normal condition the average distance between primary ionizations for fast particle should be around 300 um.
But my simulation result is about 1 mm for 500MeV electron when I set " G4ProductionCutsTable::GetProductionCutsTable()->SetEnergyRange(10*eV, 1*GeV)" in PhysicsList and "/testem/phys/addPhysics livermore". Now I suspect whether Geant4 could simulate the number of secondary electron in the TPC gas
Looking forward to reply!
|Inline Depth:||Outline Depth:||Add message:|