|Message: Re: Print out Particle tracks in Ex-No6||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I found the file though any changes I make to it, seem to not affect the run output. I rebuilt all of geant and re-built my modified copy of example number 6, but the results of the simulation are still the same.
I had tried to simply change one of the boundary transition notification messages t by changing the the string in G4OpBoundaryProcess.cc. How can I change geant4 source files that are not part of the example code and have this be reflection during simulation of an example?
All my geant source files are located at ~/geant4/geant4.9.4.po2, while my example code is located in ~/geant4TestApp/Ex-N06. Cheers,