|Message: Potential geometry or navigation problem !||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm modeling a tile with its fiber and attached profile. During the run of 10 000 events everything ran perfectly except some points where I got this warning(or similar to them):
WARNING - G4Navigator::ComputeStep() Track stuck, not moving for 10 steps in volume -FiberProfile- at point (125.14,1.74504,-2.65651) direction: (-0.0901415,-0.238709,-0.966898). Potential geometry or navigation problem ! Trying pushing it of 1e-07 mm ...
Fiber surface is from LUT tables (polishedtioair).
P.S. I've seen a similar topic in this forum and posted this just in case.
|Inline Depth:||Outline Depth:||Add message:|