|Message: Re: magnetic field in a vacuum box||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Someone may correct me if I'm wrong, but I think you are seeing sharp turns because of the MaxAllowedStep set for your volume. You'll need to set some user limits and apply them to your logical volume for the box. e.g. G4UserLimits* BoxUserLimits = new G4UserLimits(); BoxUserLimits->SetMaxAllowedStep(10*mm); BoxLogicalVolume->SetUserLimits(BoxUserLimits); Where the length set should be something small enough to be able to see the curvature as the curve will be made up of a number of straight lines whose maximum length is set by your MaxAllowedStep. Hope that helps.
|Inline Depth:||Outline Depth:||Add message:|