|Message: Infinite Loop or something similar||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I posted my problem earlier to the multithreaded forum because i thought the problem has to do something with the multithreading. I am using Geant4.10.01 in multithreading mode.
I run a monoenergetic beam (medical accelerator with small field size) and score doses in voxelized phantom. Total voxels are close to 30 million. I also apply a global magnetic field of 1.5T.
Without the magnetic field i can run 1e9 particles without any problem. As I turn the magnetic field ON i can run 1e7 particles no problem. But if i submit 5 identical jobs with 1e8 particles on five different nodes of a cluster (dosen't necessarily has to be a cluster any computer), one or two of them are completed and the other ones just go into an infinite loop at the end of the simulation. I have noticed that if e.g. i have 5 threads then 3 or 4 complete their job and they wait indenfinately for the 1-2 threads to complete and finally dump all the data (I use command based scores to create 3D grid for scoring). Like i said this happens with the magnetic field turned ON.
I would highly appreciate any help in this regard.
|Inline Depth:||Outline Depth:||Add message:|