|Message: Electron in a metal with uniform electric field||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear G4 Experts,
I have a simple question: Setup: e- is shot in +z direction. We just have a world volume, material is metal, Fe for instance. I apply E-field in -z direction, to accelerate electrons in positive z direction. Physics List I use is QGSP_BERT(I believe it is irrelevant for this setup!!!)
The question is: Is there a way to simulate electron flow in that metal with electric field applied. e- are low energy electrons: say 10eV-1keV. I used E-field up to -200*vold/um and I still couldn't achieve electron transport in the metal. So, the question is if there is a way to achieve "current flow" so to speak and how???
This is a simplified setup for a larger simulation, where I need those low energy electrons to propogate in the metal under the influence of E-field...
Thanks a lot in advance!!!
|Inline Depth:||Outline Depth:||Add message:|