|Message: error in the magnetic field for Bx to control the track along y||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I used two uniform magnetic fields to bend proton beam in x and y directions for proton spot scanning.
For example, I want to deliver a spot on (-10 cm, -10 cm) on one plane.
In Geant4.9.5.p01, the proton spot position is correct as specified. However, in Geant4.9.6.p02, for the same problem with the same source code, the spot position is away from the specified position in y direction. It was delivered to (-10 cm, -14 cm).
Please see the attached two pictures.
Who can help check the source code of G4UniformMagField.
Thanks a lot!
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2013/10/25/12.47-7864-_guanfada_Desktop_9.5.png http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2013/10/25/12.47-80530-_guanfada_Desktop_9.6.png
|Inline Depth:||Outline Depth:||Add message:|