|Message: Re: How turn on the magnetic field||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Fri, 20 Nov 2009 14:18:18 GMT, Paul wrote:
> Hi Users, > Two weeks I try to add magnetic field to my simulation. I used to N03 and in this case it was verry simple. I wrote line /N03/det/setField 3 tesla in file.mac and gave control/execute file.mac in Idle> and it worked. Next I tried to do this same method in TestEm3. When I wrote /testem/det/setField 5 tesla in file.mac and started in Idle> I got the command: COMMAND NOT FOUND.
I tried TestEm3 with the attached macro. The command setField works both in PreInit and Idle state
Are you sure of the syntax of your commands ?