|Message: Questions about SetLargestAcceptableStep()||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
When do i need to set the maximum acceptable step using the SetLargestAcceptableStep() method ? I know that if i want to get a smooth trajectory for a charged particle in the magnetic field, i need to set the maximum acceptable step to small one.However, the tracking consumes too much time. whether the maximum acceptable step setting will affect the final result or not? The dimension of detector in my simulation is <1 meter.
|Inline Depth:||Outline Depth:||Add message:|