Message: Re: Help setting up an Electric Field Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: Help setting up an Electric Field 

Forum: Fields: Magnetic and Otherwise
Re: None Help setting up an Electric Field (Adam)
Re: Feedback Re: Help setting up an Electric Field (Gumplinger Peter)
Re: None Re: Help setting up an Electric Field (Adam)
Re: None Re: Help setting up an Electric Field (John Apostolakis)
Re: None Re: Help setting up an Electric Field (Adam)
Date: 13 Jul, 2007
From: John Apostolakis <John Apostolakis>

Could you please explain a bit more what you are seeing ?  It could be 
an unforeseen side-effect from revisions.

If you can produce some verbose output for that event (eg using 
/tracking/verbose 1), it will be very helpful.

Best regards,
John Apostolakis.

Adam wrote:
> *** Discussion title: Fields: Magnetic and Otherwise
> Email replies to PublicHyperNews@slac.stanford.edu must include:
>   In-Reply-To: <"/emfields/124/1/1/1/1"@geant4-hn.slac.stanford.edu>
>   Subject: ...change this to be about your reply.
>
> Alright, thank you both for you assistance. I believe that I have set
> the field up correctly. When I run the simulation, an electron will
> remain in the xenon, but keep going and going and going... even when
> it's energy is down to 10^-8 keV. I set the E field to 1kV/cm. The
> cylinder is about 2.4m high and 2.4m in diameter. It won't stop tracking
> it! I seem to be stuck because of this. Any ideas?
>   

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 None: Re: Help setting up an Electric Field   (Adam - 13 Jul, 2007)
 Add Message Add Message
to: "Re: Help setting up an Electric Field"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]