|Message: Re: ./rdecay02 proton-beam.mac output file||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Thu, 25 Feb 2016 07:54:28 GMT, Cristian Bungau wrote:
> Hello, > > Well, I tried on multiple operating systems (OSX10, SL6, Ubuntu), still > the same. No proper activity file produced. But I noticed we are using > slightly different Geant4 versions (I am using the official 10.2 > release). I have attached the macro, output and activity file. Please > check the output file for anything not quite right (the output file you > sent is very similar to the output file I get, it is just the activity > files are quite different). > > Thank you, > > Cristian > > Attachment: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2016/02/24/23.52-17536-proton-beam.mac.txt > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2016/02/24/23.52-38334-proton-beam.out.txt > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2016/02/24/23.52-47022-proton-beam.activity.txt
I noticed that you built and are running 10.2 as multithreaded (MT), which Michel built and ran his -ref-01 release as sequential (non-MT). I don't know whether all of the /ananlysis/... actions are fully MT compliant, in particular writing data to output text files.
If you have the disk space and time, could you try building a sequential version of your G4 installation (-DGEANT4_BUILD_MULTITHREADED=OFF)? If you get a proper activity.txt file in that mode, it will help us to narrow down the problem.
-- Michael Kelsey
|Inline Depth:||Outline Depth:||Add message:|