|Message: Re: Example B1: Can not open init_vis.mac||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Sorry, with further reading I figured it out. I needed to move the exampleB1.exe file into the B1-build directory containing the macros. That solved the problem and I could run the program. Thanks!
PatrickOn Fri, 03 Jan 2014 19:56:42 GMT, Patrick Asselin wrote:
> Hi, > > I'm new to Geant4. When I tried to run example B1, everything seemed to > be going fine until the program ended with:"Can not open a macro file > <init_vis.mac." Immediately before that, the program had a problem with > the sessions types. I don't know if the two are related or if that is a > separate issue altogether. I've attached the readout from the example. > What is going wrong with the program when it reaches that macro file and > what can I do to solve it? > > Thanks, Patrick > > Attachment: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2014/01/03/11.53-31702-B1_readout.doc >