|Message: Re: Is this correct physics in Brachytherapy example?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I appreciate your responding to my query. Thank you. As I am relatively new to Geant4 and do not have much of a frame of reference of all of its internal workings, I was somewhat uncertain on how to proceed in light of the results my simulation generated for the Brachytherapy example.
Although some photon 'leakage' is expected here in reality, the number of escaping gamma rays from the housing walls in the simulation seemed quite excessive when compared it to the total number of events generated. (extensive leakage is observer for large event number)
Are there any possible reasons you might have for this? In my simulation I have also modeled my applicator housing to factory specifications.
Thank you for any suggestions that you might have.
|Inline Depth:||Outline Depth:||Add message:|