|Message: error in running my modified exampleN03||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I modified the exampleN03 to deal with Low energy gamma(140Kev) That was no problem in compiling the code.But some error happen when I run it. When I execute "gdb ./exampleN03 run1.mac",there are no problem at the beginning,then the system show me this:
. . . Refreshing viewer "viewer-0 (OpenGLImmediateX)"... Traversing scene data... Viewer "viewer-0 (OpenGLImmediateX)" refreshed. (You might also need "/vis/viewer/update".) /vis/viewer/update Viewer "viewer-0 (OpenGLImmediateX)" post-processing triggered. # # for drawing the tracks # (if too many tracks cause core dump => storeTrajectory 0) /tracking/storeTrajectory 1 Idle> /run/beamOn 1 /run/beamOn 1 ### Run 0 start. /vis/scene/notifyHandlers Traversing scene data... Viewer "viewer-0 (OpenGLImmediateX)" of scene handler "scene-handler-0" prepared at request of scene "scene-1". Start closing geometry. Start Run processing.
---> Begin of event: 0
--------- Ranecu engine status --------- Initial seed (index) = 0 Current couple of seeds = 9876, 54321 ---------------------------------------- <CalCollection> is not found.
Program received signal SIGSEGV, Segmentation fault. 0x8146912 in G4LowEnergyPhotoElectric::GetMeanFreePath ()
What is the problem? Thanks for your help.
|Inline Depth:||Outline Depth:||Add message:|