Message: No verbose output for novice exampleN01? Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None No verbose output for novice exampleN01? 

Keywords: example verbose
Forum: Documentation and Examples
Date: 11 May, 2006
From: Raymond Tsang <h0237236@hkusua.hku.hk>

Hi all,

I am installing geant4.7.1.p01 on Red Hat Linux 9.0 with gcc 3.2.2.

The installation of CLHEP-1.9.2.1 and geant4 are successful (at least not a single error message throughout the process).

When I compiled novice example N01, it was fine, but when I run it, it doesn't give the verbose output for the tracks:

*************************************************************
 Geant4 version Name: geant4-07-01-patch-01    (25-October-2005)
                      Copyright : Geant4 Collaboration
                      Reference : NIM A 506 (2003), 250-303
                            WWW : http://cern.ch/geant4
*************************************************************

========= Table of registered couples ==============================

Index : 0     used in the geometry : Yes     recalculation needed : No
 Material : ArgonGas
 Range cuts        :  gamma 1 mm     e- 1 mm     e+ 1 mm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 1     used in the geometry : Yes     recalculation needed : No
 Material : Aluminum
 Range cuts        :  gamma 1 mm     e- 1 mm     e+ 1 mm
 Energy thresholds :  gamma 6.88731 keV    e- 596.68 keV    e+ 568.011 keV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 2     used in the geometry : Yes     recalculation needed : No
 Material : Lead
 Range cuts        :  gamma 1 mm     e- 1 mm     e+ 1 mm
 Energy thresholds :  gamma 100.511 keV    e- 1.37814 MeV    e+ 1.28002 MeV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

====================================================================

Start Run processing.
Run terminated.
Run Summary
  Number of events processed : 3
  User=0s Real=0s Sys=0s
G4 kernel has come to Quit state.

I have not modified ANYTHING in the example, I just compile it and run it. It seems that the hardcoded "/tracking/verbose 1" command is ignored.

There are similar problems in running example N02 and N03.

What would possibly have caused this?

Thanks in advance!

Raymond Tsang

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

 Add Message Add Message
to: "No verbose output for novice exampleN01?"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]