|Message: Re: No trajectories detected in ParN02||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, It turns out that trajectories generated in slaves are not transfered to the master so that no trajectory is found in the EndOfEventAction. It is not in the original use-case to visualize trajectories generated in the slave machines and thus this inconvenience had happened. This problem has been notified to the auther of this example, and should be fixed in the future release. Meanwhile, please note that hits collections are correctly transfered and should not affect to the simulation results. Thank you for reporting this problem.
|Inline Depth:||Outline Depth:||Add message:|