|Message: Xray-telescope running problem||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have succesfully compiled geant4.7.1 and I have also succesfully compiled the Xray-tel example because I am interested in the gps class. I am getting the problem bellow when I am trying the command and macro: /control/execute opengl.mac
Start Run processing. Segmentation fault
So I ve tryed by the gdb and this is the result:
### Run : 0 Start Run processing.
Program received signal SIGSEGV, Segmentation fault. 0x08052ee6 in XrayTelPrimaryGeneratorAction::GeneratePrimaries () (gdb) bt
#0 0x08052ee6 in XrayTelPrimaryGeneratorAction::GeneratePrimaries () #1 0x08177a5f in G4RunManager::GenerateEvent () #2 0x08177bd6 in G4RunManager::DoEventLoop () #3 0x08176364 in G4RunManager::BeamOn () #4 0x0817954f in G4RunMessenger::SetNewValue () #5 0x082c096e in G4UIcommand::DoIt () #6 0x082c8863 in G4UImanager::ApplyCommand () #7 0x082d1a93 in G4UIbatch::SessionStart () #8 0x082c8c73 in G4UImanager::ExecuteMacroFile () #9 0x082d27db in G4UIcontrolMessenger::SetNewValue () #10 0x082c096e in G4UIcommand::DoIt () #11 0x082c8863 in G4UImanager::ApplyCommand () #12 0x080ec17b in G4UIterminal::ExecuteCommand () #13 0x080ebffb in G4UIterminal::SessionStart () #14 0x0804e3e0 in main ()
I don't know If I need any software installed to use this class.
Any suggestion about the problem, Im getting crazy?
Thanks in advance, Andres
|Inline Depth:||Outline Depth:||Add message:|