|Message: Re: Ion particles in svalue example||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thank you very much for your response. I have tried adapting the physics lists from microbeam and rdecay01 into that of svalue, and it will now calculate the energy deposited (it didn't previously) but still shows 0 for the S value.
>The run is 1000 Ac225 of 300.00 eV through a sphere of radius 2.88 cm of G4_WATER (density: 1.00 g/cm3 )
>Total Energy deposited = 28.639 MeV +- 896.267 keV
>S value = 0.000 Gy/Bq.s +- 0.000 Gy/Bq.s
>Track length of primary track = 18.771 nm +- 0.000 fm
> Projected range = -68.380 um +- 1.299 cm
>Nb of steps of primary track = 2.00 +- 0.00
>Step size = 9.386 nm +- 0.000 fm
I realise I probably have more than necessary as I was hoping for a result and to tidy the code afterwards.
Could you or someone else please have a look at my physics list and perhaps point me in the right direction? Thank you.