|Message: energy distribution along depth of absorber||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
As medical physicist, I would like to have an idea of the distribution energy of the 1aries (e-) and 2aries (e- too) created along the depth of my absorber (water). I ve derived my own files from the testEm5 for a lot of diags already exist. In StackingAction file, I could use aTrack->GetKineticEnergy but it should associated with a condition on the location where the distribution is taken which means the use of StepPoint (as in TestEm11) but StepPoint is reserved to be used in SteppingAction file.
Any idea to set up this diag would be helpful.
Thanks in advance.