|Message: Re: different energy deposit value using scoring mesh||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have also found something strange using scoring mesh. I was performing similar tests to check consistency of results: Cube of water 50x50x50 cm3. Cubic scoring mesh with number of voxels running from 1x1x1 to 20x20x20. For each configuration of the mesh I launch 100 electrons of 6MeV at the center of the cube and I get the following deposited energy, integrated over the whole mesh:
nvoxels = 1x1x1 = 1 --> edep = 592.5 MeV --> edep/nvoxels = 592.25 MeV.
nvoxels = 4x4x4 = 64 --> edep = 38.18 GeV --> edep/nvoxels = 596.57 MeV.
nvoxels = 5x5x5 = 125 --> edep = 74.7 GeV --> edep/nvoxels = 597.66 MeV.
nvoxels = 20x20x20 = 8000 --> edep = 4767 GeV --> edep/nvoxels = 595.90 MeV.
In the macro I use I change just the mesh banning from run to run. What could be the problem?