|Message: Re: Transportation manager has too many active navigators||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
has this question been answered? I ran into the same problem (GEANT4.10.00), I have 7 scoring meshs, if I add one more, I get an error similar to the one already reported by Dylan:
-------- EEEE ------- G4Exception-START -------- EEEE ------- *** G4Exception : GeomNav0002 issued by : G4PathFinder::PrepareNewTrack() Too many active Navigators / worlds. Transportation Manager has 9 active navigators. This is more than the number allowed = 8 ! *** Fatal Exception *** core dump *** -------- EEEE -------- G4Exception-END --------- EEEE -------
I could track this message down to come from ...../source/geometry/navigation/src/G4PathFinder.cc (line 376ff), but have no clue what it means.
The meshs have each only 210 bins in x, and 1 bin in y and z each.
From the UserGuide, I do not conclude that there is an upper limit on the number of meshs.
Any help would be appreciated.
|Inline Depth:||Outline Depth:||Add message:|