|Message: Multiple scorers with multiple Logical Volumes||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have a cellPassageCurrent scorer attached to a parameterized volume with 121 copy numbers. It keeps track of each of the 121 scorers per each event. This counts particles that pass through certain regions of my detector. I would also like to keep track of every secondary that is produced for each event. I made a nOfsecondary scorer and attached it to an outer logical volume.
Now with my output, I get a the count for the nOfsecondary in the first place of my hits map and one of the 121 copy numbers is lost. I thought that the new scorer just went on top of the others and I could have to output one more cell from the hits map, but there is nothing there. Also when I have a run of multiple events, the total of the cellPassageCurrent scorer out numbers the total number of secondaries produced. This is not right, the number of secondaries produced should always be greater than or equal to the particles counted by the passage current scorer.
I have included my run.cc , detectorGeometry detector and the final output.
Any help or insight would be greatly appreciated.
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2011/05/16/09.39-47081-ExN06Run.txt http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2011/05/16/09.39-68862-6DetectorConstruction.txt http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2011/05/16/09.37-25324-EndOfRun.csv
|Inline Depth:||Outline Depth:||Add message:|