|Message: Splitting problem for secondary generated by RadioactiveDecay process||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
In simulation code, I have used a spitting technique by using USERBiasingOperation and USERBiasingOperator class derived from G4VBiasingOperation and G4VBiasingOperator, respectively. However, when a particle meets RadioactiveDecay process, the weight of secondaries generated by RadioactiveDecay process is initialized, that is, the weight value of secondaries is set to 1, regardless of the perent's weight value.
Could you check the source code to address this problem???
|Inline Depth:||Outline Depth:||Add message:|