|Message: How to G4MultiFunctionalDetector together with Multi-layer Readout Geometry?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have never used readout geometry before.
I was trying to construct a multi-layer Readout Geometry and using G4MultiFunctionalDetector to collect the energy deposited in each layer. I have done these in tracking geometry before by dividing the target into layers and set sensitivity for each layer with G4MultiFunctionalDetector.
Since the tracking geometry becomes irregular, I want to use readout geometry. But after dividing Readout geometry into layers, I don't know how to set sensitivity for each layer and implement G4MultiFunctionalDetector to collect the energy deposited in this layer. I refered to N04.
Any suggestion are appreciated. Thanks.
|Inline Depth:||Outline Depth:||Add message:|